ONLY AVAILBLE IN BLACK /LIMITED EDITION RUN
-ALL FRAMES COME WITH 16 ALUMINIUM CUSTOM OVAL SPACERS
-8MM KALTIK MALE & FEMALE AXELS
-8 NATURAL LUBRICATED HARDENED NYLON BEARING SPACERS
-AVAILABLE IN TWO SIZES S/M & M/L
-S/M { US 5-9 UK 4-8 EU 37-42 }
-M/L { US 9-13 UK 8-12 EU 42-47 }
Size Small: 26.3cm rockered up, 26.8cm rockered down (center of axle #1 to #4)
Size Large: 28.3cm rockered up, 28.8cm rockered down (center of axle #1 to #4)
- OPTIONAL ROCKERING SYSTEM 10MM DIFFERENCE UP/DOWN
- UP / DOWN MAX WHEEL SIZE 70mm Outer - 60mm Inner
- MAX 64mm ROCKERED UP FLAT
- MAX 68mm ROCKERED DOWN FLAT
Had high hopes for these and was let down., February 15, 2019 By Anonymous (Cortland, NY)
These frames really don’t live up to the hype of the flat v1. I immediately noticed after 1 session several issues. First the inner wheels rocker spacers are about 2mm higher than the outer so advertised flat wheel sizes don’t actually roll flat immediately,think like a 2mm anti rocker.(big deal to me because who likes spending 80$ on wheels advertised to roll flat for them to not)The inner wheel tolerances are very tight and they were causing binding issues on brand new bearings along with the “clicking noise”. Also I noticed the frames are bowed right out of the box and even cranked as tight as you can go to your boots there’s still a little bow there. the new h block feels very nice compared to the v1 and the material feels a lot stronger. overall though this frame feels more like a bad prototype than a released final product. I would highly reccomend different frames than these. The cons outweigh the pros. I would have returned these if I didn’t already have a p rail session on em and it was an option. I’d reccomend the v1 by kaltik way before I would touch these again.
Disappointing., February 14, 2019 By Anonymous (Cortland, NY)
So the good is the new h block and material are really an amazing improvement...but that’s about it for the good.As for the issues I noticed owning these not even a week.Bearing binding issues because the inner rocker spacers are so tight.the inner wheels actually sit about 2mm higher in the frame than the outer.As a result advertised “flat” sizes are off. For example 70/60/60/70 70 up 60 down is supposed to be flat but there’s about 2mm gap on the inners from the ground.(this really bothered me as I like to skate 8 down out of the box) Also my frame out of the box was bowed about 5mm and bolted to my boot as tight as I could go they still were bowed. Honestly regret buying these. 80$ in wheels plus the cost of frames down the drain seemingly.
Ask a question, get help, send feedback, whatever!
